Accessories Receiving Card 5A-75B

5A-75B

Receiving Card

The 5A-75B receiving card is a cost-effective product specially launched by Colorlight to better help customers save costs, reduce failure points, and reduce failure rates. On the basis of making full use of the technical advantages of the 5A receiving card, the most common HUB75 adapter board on the market is integrated into the receiving card, which is more reliable, more worry-free, and more affordable under the premise of ensuring high-quality display.

Features

Integrated HUB75, no need to equip with adapter board, more convenient and lower cost
Reduce the number of plug-in connections, reduce the point of failure, and lower the failure rate
Support conventional chips to achieve high refresh, high grayscale, and high brightness
Brand new grayscale engine, better performance in low grayscale
It can eliminate the details of dark, low gray and reddish, ghosting and other details caused by the design of the unit board
Support high-precision integrated point-by-point correction of chroma and brightness
Support all conventional chips, PWM chips, Silan chips and lighting chips
Support any scan type from static to 64 scans
Supports arbitrary extraction points, supports data group offset, and can easily realize various special-shaped screens, spherical screens, and creative displays
Support random selection
Single card supports 16 groups of RGB signal output
Support large loading area
Support DC 3.3V~5.5V ultra-wide working voltage
Support Colorlight’s full range of sending equipment

Parameter specification table

Control system parameters

Single card control area

Single card correction area

Any exchange of network ports

Synchronization between card and card

Display module compatibility

Chip support

Scan type

Supported module specifications

Cable direction

Number of data sets

Data discount

Data exchange

Module Snapshot

Module Draw Draw

Data serial transmission

Compatible equipment and interface types

Main control and card, between card and card

Communication distance

Compatible transmission equipment

DC power supply interface

HUB interface type

Physical parameter

Board size

Input voltage

Rated current

Rated power consumption

Storage and transportation temperature

Operating temperature

Anti-static ability of human body

Weight

Environmental monitoring & remote control (need to cooperate with multi-function card)

Monitoring function

Remote control

Other functions

Point-by-point correction

Loop backup

Alien screen

Full color: conventional: 256×512, PWM: 384×512, Silan: 324×512

Brightness correction: conventional: 256×512, PWM: 384×512, Silan: 324×512

Chromaticity correction: conventional: 256×512, PWM: 384×512, Silan: 324×512

The network port can be used arbitrarily regardless of input and output

Nanosecond synchronization between card and card

All mainstream LED driver chips

Any scan type from static to 64 scans

Arbitrary row and column assembly within 8192 pixels

Support left to right, right to left, top to bottom, bottom to top routing

16 sets of full color data

Support double fold in the same direction, reverse fold in half, fold in half in the same direction

Support 16 groups of data arbitrary exchange

Support any point

Support random selection

Support RGB, R16G16B16 and other forms of serial

Category 5 network cable ≤140M Category 6 network cable ≤170M

Optical fiber line: single-mode transceiver ≤20KM, multi-mode transceiver ≤550M

Gigabit switch, Gigabit fiber optic transceiver, Gigabit fiber switch

Needle seat VH3.96mm-4P

Barrier terminal block-8.25mm-2P

Comes with HUB75 interface

Length 143.64mm, width 91.69mm

DC 3.3V~5.5V

0.6A

-50°C to 125°C

-25°C to 75°C

2KV

100g

Support real-time monitoring of environmental info such as temperature, humidity, and smoke

Support remote relay switch device power supply

Stand by

Support to realize special-shaped screen through arbitrary offset of data group;

Support spherical screen, diamond screen, cube screen, irregular shape screen and other special-shaped displays

Indicator light

Interface Description

Power input 1

Power input 2

Ethernet port A

Ethernet port B

Test button

Power Indicator

Signal indicator

External interface

HUB interface

Connect a DC 3.3~5.5V power supply to supply power to the receiving card

RJ45, used to transmit network signals

With its own test program, it can realize four kinds of monochrome display of red, green, blue and white, scanning display in horizontal sweep, vertical sweep, etc.

Constant red light indicates that the power supply is normal

1 flash/sec:

The receiving card is working normally, and the network cable is connected normally;

10 flashes/sec:

The receiving card is working normally, and the box is in the state of being calibrated;

4 flashes/sec:

In the loop backup state, the receiving card works in the backup sending card state

External interface for indicator light and test button

HUB75 data interface, J1~J8 connect to the display unit board

Only use one of them

Dual network ports enter and exit at will,

Intelligent system recognition